FTU Autumn Whispers

Templet by Millie HERE

 

Bounty of leaves by Peace  HERE

 

Mask by Weescotlass WSL-mask 364- HERE

its the 3rd mask down.

 Tube Renee Biertempfel At CDO HERE

 

C-P means Copy and paste

 

Ok lets start

 

Make a new image 600-600

 

Open Element BOL30 Resize 53% C-P to tag

 

Open Element BOL12 Resize 53% C-P to tag

 

Open Element Bol32 Resize 74% C-P to tag

 

Open Element BOL31 Resize 35% C-P to tag

 

Open Element BOL67 Resize 80% C-P to tag

 

Open Element BOL70 Resize 43% C-P to tag

 

Open Element BOL78 Resize 58% C-P to tag

 

Open Element BOL84 Resize 33% C-P to tag

Duplicate and see tag of where to place it.

 

Open Element BOL13 Resize 48% C-P to tag

 

Click on layer 9 make a gradient with 2

colors of your tube and elements, and flood

fill it do the same with layer 8 and 1

 

Then I picked a light color to flood fill layers

3, 6,7

 

Click layer 5 then add texture blinds see below at

the settings.

 

I added a gradient glow with Eye Candy

with the settings below to each templet

layers.

 

Choose your close up tube and c-p to

your tag and position 1 on top of layer 9

and then select that layer then select all

float, defloat, then on invert then on your

keyboard hit delete.

Do the same thing with

your close up tube on the layer 8 I mirrored

this one so they were opposite.

 

 I turned the

opacity to Screen for both tubes.

 

Now add your full length tube and move it under

the word art.

Then move your word art where you want it then

so to Select all, float, defloat, modify by 2,

then make a new layer and flood fill it with white

into the selection then select none then move this

layer under the original so it looks like it has

a white boarder.

 

Now I added drop shadow to all elements with these

settings below. I also added drop shadow to the white

word art layer.

Ok now open paper BOLPaper4 resize it 75% then copy

and paste it to tag move it to the back then go to

layers new mask later, from Image and in the pull

down menu choose WSL_363 then on ok.

 

Now time to add your name and copywrite and

your done :)

FTU Autumn Colors

 

Autumn Templet by Flamin HERE
 

 

Autumn Kit Bounty of leaves by Golden HERE
 

 

Mask Weescotslass- WSL-363  HERE

 

Very Many Tube- HERE 

 

Open tube and mask minimize

Open Templet Duplicate and close original

 

Open Element pumpkin1 Resize 60% C-P to tag

 

Open Element Berries3 Resize 60% C-P to tag

 

Open Element leaf spray2 Resize 71% C-P to tag

 

Open Element Leaves2 C-P to
tag Duplicate mirror

 

Open Element Leaves3 C-P to tag
Duplicate

 

Open your tube place her behind elements then
use eraser brush to erase what is stickin out
below elements.

 

Now copy and paste close up and position it
on top of the orange circle
then on the layers click select all,
defloat,modify by 4, then hit invert
then go back to the tube close up layter
and hit delete on your computer
keyboard.

 

Open Element berries1 Resize 85% flip C-P to tag
move it under the yellow circle

 

Open Element birdhouse2 Resize 43% C-P to tag

 

Click on the Shades layer then select all
float, defloat, Modify, expand by 2, make a new
layer and flood fill selections letters with white
then move layer below the shades layer to make it
have a white edge.

 

Open Element fog1 Resize 41% C-P to tag

Open Element leafspray5 Resize 87% C-P to tag duplicate
put one top one bottom.

 

I added a Gradient glow to all of the templet pieces
this is the settings below.

 

Then I added a drop shadow to all elements see below
of settings.

 

Then I made a gradient with 2 colors of my tag see

below.

 

 

Make a new layer and flood filled it then I went to layers
new mask layer, from image then in pull down area choose
mask then hit ok.

now you need to add your name and copywrite and your done.

FTU Witch bag

Mask WsL-364 HERE

 

Arthur Crowe Tube HERE

Magik FTU kit named-Pumpkins and Candy Corn
 HERE
 

C-P means Copy and paste

 

Ok lets start
open tube, and mask and minimize them

 

open 600-600 new image

 

Open Element Frame 3 Resize 91% C-P to tag

 

Open Element flower2 Resize 19% C-P to tag

 

Open Element Halloween pumpkins
 Resize 80% C-P to tag

 

Open Element sign Resize 80% C-P to tag

 

open standing tube and place it in tag

 

open close up position under frame then
use your magic wand tool and select inside
of the frame, then select invert then go to you
closeup layer and hit delete on your key board
Then turn opacity to luminance-legacy

.

Make a gradient with the colors of your tube
and make new later and flood fill it then go
layers choose new mask layer from image then
in pull down menu choose WSL mask then on ok

 

Then add a drop shadow to elements and tube

then add your name and copywrite and your
done :)

 

FTU Beachin Tut

 

Kit Sea Breeze  by Peace HERE

Mask by Weecloss WSL-mask 364
its the 3rd mask down. HERE

Elias Tube HERE

OK lets start

C-P means copy and paste

Open tube, and mask minimize.

 

Open 600 X 600 new image.

 

Open paper #7 C-P to tag, then click on
layers, new mask layer, from new image
click on the pull down layer choose WSL_mask364
then ok. Then on your layers on right side merge
group. 

 

Open Element palm tree Resize 73% C-P to tag
Then take your pick tool and make the element
longer.

 

Open Surfboard resize 62% C-P to tag

 

Open Element sand2 C-P to tag we are going to
deform this one also move it to the bottom of
your tag and push it down so its longer than
wide, then pull the ends out to make it fit your
tag.
Look at the size I made it settings are.
 pivotX 299.50, pivot Y 508.50, positionX -2.oo, positionY 421.00

 

Open Element pelicanpost Resize 50% C-P to tag

 

Open Element grass Resize 77% C-P to tag move behind the pelicanpost
element and close it. 

 

Open Element grass again Resize 46% C-P to tag move this
over by the surf boards.

 

Open Element shells Resize 36% C-P to tag

 

Open Element openpearl Resize 46% C-P to tag

Ok add your name and copywrite and your done :)

 

FTU #2 Summer Romance

Supplies

Colab Kit by Peace Romantic Summer HERE

Mask WSL-223 HERE

Tube Zindy Sd Nielsen HERE

C-P means Copy and paste

 

Lets Start .....

Open Frame0 and open paper3 then c-p paper

to frame as new layer then click on

the frame layer, and go to selections

select all, float, defloat, then click

on invert then on your keyboard click

delete button then go to your layers

opacity turn it to Color on the paper layer

, and make

sure the paper later is on top.. ok

now merge visable and resize 93%

 

 

Now open a 600 X 600 new image

C-p Frame to new image.

 

Open Rs43 Element C-P to tag

Open Rs41 Element resize 65% C-P to tag

 

Open RS109 Element resize 90% C-P to tag

 

Open RS98 Element resize 44% C-P to tag

 

Open RS90 Element resize 44% C-P to tag

 

Open RS49 Element C-P to tag

 

Open RS104 Element resize 75% C-P to tag

 

Open RS28 Element resize 70% C-P to tag

The duplicate and then flip then mirror.

Make a Gradient with these 2 colors

#ffffff, #ca6098

 

 make a new layer and

flood fill with this color move layer to

bottom then click on layers, new mask layer

from Image, then in pull down menu choose WSL_223

then on ok

.

Click on Ellipse, then make close off forground

and make your gradient again for background, then

draw out a ellipse for bg of your frame and move under

your frame layer.

Add your tubes.

I added a drop shadow to all the elements and tube

now add your copywrite, your name and license and your done.



FTU #1 Summer Romance

Supplies

Colab. Kit by Golddust HERE

 

Mask WSL-223 HERE

 

Alex Prihodko Butterfly Tube from PFD- HERE

 

Ok Lets Start

 

Open 600 x 600

 

Open Element Frame4 Resize 76% C-P to tag

 

Open Element leaves3  C-P to tag

then click image, Free Rotate, Right 66.00 degrees

 

Open Element flowers3 resize 85% C-P to tag

\then click image, Free Rotate, Right 66.00 degrees 

 

Open Element Hearts2 Resize 62% C-P to tag

 

Open Element light, mirror, Resize 50% C-P to tag

 

Open Element Stars1 Resize 50% C-P to tag

Open Element Stars3 Resize 24% C-P to tag move
below the frame.

Open Element Bow5 Resize 74% C-P to tag

 

Open Element Butterfly Resize 74% C-P to tag

 

Make a Gradient with these 2 colors
#61457b, #e0ea82

 

 make a new layer and
flood fill with this color move layer to
bottom then click on layers, new mask layer
from Image, then in pull down menu choose WSL_223
then on ok.

Click on Ellipse, then make close off foreground
and make your gradient again for background, then
draw out a ellipse for bg of your frame and move under
your frame layer. 

 

Now open your tube choice and move it under elements
and erase parts sticking out.

 

Now add a drop shadow to elements and your name and
Tube copywrite and license and your done :)

FTU Funky Punky

Arthur Crowe HERE

Mask WSL_230 HERE 

Kit by LAcarolita Funky Punky HERE 

Lets Start 

open 600 X 600 new Image 

Open Tube and Mask Minimize 

Open Element Stars4 change color by going to adjust, Hue and Saturation

Colorize, then settings 199, 87 see screen shot below,

then resize 50% C-p to tag

Open Element stars2 change color instructions are above resize 40% C-p to tag 

Open Element stringbow1 change color instructions are above mirror 

resize 55% C-p to tag 

Open Element LP2 change color instructions are above resize 26% C-p to tag 

Open Tube resize 65% c-p to tag 

Open Element Skull1 resize 31% C-p to tag then used

my eraser brush to errase some of the top hanger to look like its hanging on the 

top of star.

Open Element Ticket2 change color instructions are above resize 40%  then click

image, free rotate 40% C-p to tag 

Open Element musicalnotes3 change color instructions are above resize 59% C-p to tag

Open Element starglass3 change color instructions are above resize 34% C-p to tag 

Open Element Skull charm change color instructions are above resize 34% C-p to tag 

on this element I erased some to make it look like its attached to string.

Open Element Bow1 change color instructions are above resize 22% C-p to tag 

Open Element Tennisshoes1 change color instructions are above resize 27% C-p to tag 

Open Element musicnotes4 change color instructions are above resize 55% C-p to tag 

Open Element musicnotes7 change color instructions are above resize 55% C-p to tag 

Open new Raster Layer move to bottom, then now we are 

going to make a gradient 

to flood fill this layer with use white as forground and #672f89 background 

then use the settings in screen shot below to make the gradient

 and use 

it to fill that new raster layer you made. Now while your still on this layer

go to layers, new mask layer, then in pull down menu choose WSL_230

I added a drop shadow to all the elements see screen shot for settings

below.

Add your signature and copywrite and your done :) 

FTU #2 Celebrating Freedom

 

Kit by Peace Celebrate Freedom Here

 

My Templet set  HERE

Use Templet #4
 

Keith Garvey Tube HERE

 

Plugin Eye Candy Gradient Glow

 

Mask Weescotslass - WSL_364 HERE

 

 

OK Let Start

C-P means Copy and paste

 

Open Tube minimize, open mask minimize

Open Paper 17 resize 75% C-P to templet move

it above Raster 3 then click on the raster 3

layer to select it then click your magic wand

and click inside of the raster 3 to select

it, then go to selections click invert then

on your key board click Delete.

 

Click on the raster 8 layer and flood fill

with this color #b8080b

 

Click on copy of Raster 4 layer flood fill with

this color #b8080b

 

Click on the raster layer 6 and flood fill

with this color #104887

 

Click on Raster 4 layer flood fill with

this color #104887

 

Click on copy of Raster Raster 5 flood

fill with #104887

 

Click on Raster Raster 5 flood

fill with #b8080b

 

Open paper #4 resize 75% copy to templet

then click on vector 1 layer, Rt click and convert

this to a raster layer then click on select all, float

defloat, then on invert then click on the paper

layer and hit delete on your computer move this layer

above the raster layer we made.

 

Open close up tube, copy and paste the close up and move

it under your templet layer Raster 3 then take your

eraser tool and erase all that sticks out. Then turn

this opacity layer to Overlay.

 

Copy another layer of the close up and position

it so you see the face in the star layer, and then

click on the copy of raster 2 layer, then click

with your magic wand in the middle of this layer

to select it then click on selections and click invert

then click on your tube layer and click delete on

your computer.

Do the same thing with the other star layer #2 raster.

Then turn both tube layers, opacity layer to Luminence.

 

Open element CBF20 Resize 75% C-P to tag

 

Open element CBF39 Resize 50% C-P to tag

 

Open element CBF35 Resize 50% C-P to tag

Open Element CBF46 Resize 50% C-P to tag

 

Open Element CBF36 Resize 75% C-P to tag

 

Now I added a Gradient Glow around the Raster3

and both stars-(Raster2, and Copy of raster2)

Settings are below for Eye Candy Gradient Glow.

 

 

I then resized whole tag 92% then sharpened tubes.

And gave elements and tube a drop shadow of

 2,-1,50,5.00 black

 

Then go to image and make canvas size 600X600 again.

 

Then I c-p the full length tube in tag and add a drop shadow.

 

Now C-p paper #17 and move it to the bg layer then go to layers

new mask layer, from image then in pull down window select mask

WSL_364 then on ok

Now put your name and copywrite and your done :)

 

I made a 3 piece set by moving the pieces around and croping

it and adding a frame.

 



FTU #1 Celebrating Freedom

 

GoldDust FTU Kit Celebrate Freedom HERE
 

Tube Elias Chatzioudis HERE
 

Mask Vix Big Mask005 HERE
 

 

Lets start

Open a new image 600 X 600

 

Open Tube and Mask Minimize for now.

Open Frame 2 Resize 76% C-P to tag

 

Open Frame 1 Resize 60% C-P to tag

Click on your magic wand tool and
use Add-Shift mode, then select every Star
in the blue frame. Then open a new raster
layer then go to selections expand by 4,
and then flood fill all the stars with white.

 Move this layer under the blue frame.

 

Select red frame layer and select all the stars
like you did before with the magic wand then
open paper #7 resize it to 70%
then copy and paste it to your tag then
go to selections and click invert then
click delete on your keyboard.
move this under the red frame layer.

 

Open Glitter1 Resize 98% C-P to tag

 

Open Glitter2  C-P to tag

 

Open Glitter3 Resize 96% C-P to tag

 

Open Rose1 Resize 59% C-P to tag

 

Open Rose2 Resize 59% Mirror then C-P to tag

 

Open PaperFlower2 C-P to tag

 

Open Flower3 Resize 75% C-P to tag

 

Open Flower2 Resize 59% C-P to tag

 

Open Flower1 Resize 60% C-P to tag

 

Open butterfly #1 Resize 34% C-P to tag

 

Open Ribbon Resize 75% C-P to tag

 

Open Star string Resize 77% C-P to tag

 

Open your tube and choose close up and move
it under your frames, then erase all that is
showing outside of the frame.

 

Open your tube and c-p it to tag.

 

In your color materials set your Forground
to #cf0d11 and background to #217ec4 then
make a gradient with these 2 colors on your
background color and close off the forground.
Then you will go to your elipse tool and draw
a Ellipse and move it behind all the frames layers.
This is the settings below for the gradient.

Then go to your close up tube and go to
opacity and turn it to blend mode Luminence
and turn it down to 59% opacity.

 

Open paper #3 C-P to tag move it to the
bottom layer then go to layers New Mask
Layer, From Image then in drop down menu
choose the Vixbigmask005 then on ok.

 

I added a drop shadow to all the elements
and tube of this screen shot below.

 

 

Ok add your copywrite and you name and
your done.

I made a 3 piece set

 

FTU Lets Party

Arthur Crowe HERE

 

 

Scrap kit by Tashas Playground Party in the City HERE

 

Mask- WSL MASk 230 HERE

 

Ok lets start

Open Tube and Mask Minimize both

 

Open new image 620x620

Open wordart Element resize % C-P to Tag

Open Frame2 free rotate left C-P to Tag

 

Open Frame Element C-P to Tag then move it under
your frame 2 in layers then use your Pick Tool or
move it (resize by hand)to make it fit your top
frame like its a part of it.

 

Open streamer Element resize 90% C-P to Tag

 

Open Bow2 Element resize 66% C-P to Tag

 

Open Sparkle2 Element resize 87% C-P to Tag

 

Open Stars Element resize 87% C-P to Tag

 

Open Tag Element resize 60% C-P to Tag

 

Open Lips Element resize 60% C-P to Tag

 

Open Shoe Element resize 60% C-P to Tag

 

Open Flower Element resize 33% C-P to Tag

 

Open Glasses Element resize 55% C-P to Tag

 

Open your close up tube and place it under
your frames layers.

 

Click on your Red Frame layer then on magic
wand then click inside of your frame to select
it then on selections, modify by 4, then invert
and then hit Delete on your keyboard do not deselect.

 

Open paper6 resize 89% C-P to Tag then hit delete
on your computer again then go to selections
and select none. Then move this layer below your tube
layer.

 

Click on your tubes layer and turn the opacity to Hardlight and
I turned it to 51% Then I used Plug in Xero with settings below
50,128,146

 

Open paper 1 resize it to 78% C-P to tag move it to bottom
layer then while the paper layer is selected go to layers
new mask layer from image and then in drop down menu use
WSL_230 then on ok.

 

I added a drop shadow to all elements and frames

 of

and then resized the whole tag to 97%

Now add your copywrite and your name
and then add drop shadow to yout name and your done:)

I made 3 piece set

 

FTU - Key to Beauty

Tube Keith Garvey HERE

 

Scrap Kit MonoCromatic-by Gimptastic Scraps HERE

 

WSL MASk 230 HERE

 

Plug in Xero -Porcelain

 

Font -Alaskac

Open 600X600 new image

Open Element Swirl resize 80% C-p to tag

Duplicate move one to each corner oposite.

 

Open Frame 4 then click image, free rotate it 90 degrees

 left , Resize 85% then C-P to tag

 

Open Element feather resize 82% C-P to tag

 

Open Fan Element resize 61% C-P to tag

 

Open Jewel Flower Element resize 82% C-P to tag

Open Scatter Element click Image,then free rotate 90 degrees to left

C-P to tag move it under your frame

 

Open Light Scatter resize 45% C-P to tag turn down opacity

to 67%

Open Flowers Element mirror, click on Image, the

 Free rotate 30% C-P to tag

 

Open Key Element resize 90% click on image, free rotate 90 degrees to left

 C-P to tag

Open Watch Element resize 57% C-P to tag

Open Gem pin Element resize 67% free rotate 30degrees left

C-P to tag

 

Open your tube and choose close up and c-p to tag moving it

under your frame then click on your magic wand tool click in the middle of frame

then go to selections, modify then when pop up choose 4, then ok then selection

the choose invert then hit delete on your computer, dont deselect

go to paper 7 open it c-p to thread then hit delete on puter again then move it

below your tube. Now turn the layer to Luminance.

 

Open Sparkles Element C-P to tag and turn down opacity to 61%

Then C-P paper 7 again and move it to the bottom layer and then go to

layers then new mask layer from image in pull down menu choose WSL_Mask230

 

Copy and paste your tube to tag

then go to Ajust and Hue and Saturation, then in pop

up settings Hue250, and saturation 0 this will

make your tube grey scale.

then use your plugin Xero-Porcelain

Settings 50,128.155 See screen shot below on your tube.
 

 

 

I added a drop shadow to all elements and tube.

see below screen shot.

 

then add your copywrite and name and your done :)

I used Font AlaskaC for name.



FTU Biker Babe

Supplies

ELias Chatzoudis HERE

Biker Babes kit by ScrapbyTK - HERE 

Vix Big Mask 05 HERE

Open tube and Mask and minimize  

Lets Start 

open 600 X 600 

open Element 2C Resize 50% copy and paste to tag

Duplicate and Flip

  

open Element Frame3 Resize 89% copy and paste to tag 

open Element 10 Resize 53% copy and paste to tag 

open Element 9a Resize 82% copy and paste to tag 

open Element 4G Resize 40% copy and paste to tag 

open Element 7D Resize 27% copy and paste to tag 

open Element 6c Resize 71% copy and paste to tag 

Now go to your rectangle took make a gradient with these 2 

colors #724876-Background #b37eb8-Forground then

use Style Close off your forground and then draw out

a rectangle with your gradient for bg to your frame.

See screen shot below for settings.  

Copy and paste paper #4 copy and paste it to tag 

move it to the bottom then on new Mask Layer from

image, then in pull down menu choose Vix Big Mask05 then on ok. 

Add your tube and move behind all the elements except your

frame. Add your text and copywrite and your done :)

Rocking Blues

Arthur Crowe Tube HERE

Abstract Creations -Blue Music Kit HERE

Mask from Weescotslass WSL_99  HERE 

scroll down look on the right side for the folder with 99 in it. 

Lets start OPen Tube and Mask and minimize both. 

Open 600 x 600 new image 

Open Element e45 c-p to tag

Open Element e4 Resize 90%  c-p to tag

Open Element e44 c-p to tag

Open Element e27 Resize 97%  c-p to tag

Open Element e45 c-p to tag

Click on your Magic Wand tool and click in the 

middle of your frame to select it then click on 

selections, and then modify Expand 4 pixels

then on Invert you will now click on each layer 

below the frame and then click delete on your

keyboard to delete the areas sticking out past 

your frame then Select none. 

Open Element e5 Resize 77%  c-p to tag duplicate

and mirror it. 

Open Element e26 Resize 52%  c-p to tag then free

rotated a little so that it look like its leaning 

Open Element e8  Resize 33%  c-p to tag

Open Element e39  c-p to tag

Open Element e9 Resize 47%  c-p to tag move this layer

in back of your speakers. 

Open Element e6 Resize 83%  c-p to tag

Make a gradient with these 2 colors 

White and #2182e3 Radial, 9 repeats and make a new Raster

layer and flood fill with this gradient with this 

layer selected click on Layers, new mask layer, from

image then in pop up use pull down and select WSL_99 

then on ok. 

Open your tube and place it and then add your name and copy write 

and your done :)

PTU-Lifes a beach

 

 

 

 

Loris -PTU Kit Life is a beach HERE
And you can also get the KIT in Graphic Groupies
Forum HERE with your earned Groupie Gold

 

WSL363 mask  HERE

 

C-P = copy and paste

 

Ok lets start

 

Open 600 X 600

Open Element Frame2 resize 88% C-P to tag

 

Open Element 20 resize 88% C-P to tag

 

Open Element 12 resize 90% C-P to tag

 

Open Element 13 resize 59% C-P to tag

 

Open Element 1 resize 50% C-P to tag

Open Element 27  C-P to tag

 

Open Element 5 C-P to tag

Open Element 8 resize 88% C-P to tag

 

Open Element 20 resize % C-P to tag

 

Open Element 4  resize 46% C-P to tag

 

Open Element 21 resize 72% C-P to tag

 

Open Element 23 resize % C-P to tag

 

Open Element 2 resize 72% C-P to tag

 

Open Element 19  C-P to tag

 

Open Element 22 C-P to tag

 

open paper #3  and c-p to tag
move it to the bottom layer then
click on the frame layer
and select with your magic wand the inside of
frame then go to selections,the defloat then
invert and then click delete on your keyboard.

 

Make a gradient with this color #0f84b2 and white
with these settings below

Make a new layer
Then flood fill with the gradient then with this
layer selected click new mask layer, from image,
then in pulldown tab select wsl-363 mask then on
ok.

 

 Ok put a copywrite for your tube and your name and
your done.

FTU Dotty Diva

 

 

CCreationz Kit-Red Polka Emo- HERE

 

Alicia Mujica Exclusive tube -CDO HERE

 

Mask By Lori at Sis-19 HERE

Penta- Colordot- Plug in

 

Xero-Porcelain- Plug in

 

C-P= copy and paste

 

Lets Start
Open Tube and Mask minimize both

 

OPen 600x600 new image

 

Open Element frame3 Resize 69% C-P to tag

 

Open Element9 resize 62% C-P to tag

 

Open Element18 resize 93% C-P to tag

 

Open Element22 Resize 30% C-P to tag

 

Open Element4 Resize 32% C-P to tag

 

Open Element25 C-P to tag

 

Open Element Resize % C-P to tag

 

Open paper 1 resize 75% c-p to tag move it to
the bottom layer , then click layer new mask
later then on from Image then choose SIS19 mask
in the pull down menu then on ok.

Open Tube and place close up in frame and erase all
that sticks out.

 

 Open your standing tube place it on tag.

 

Click on Ellipse tool and draw out a circle and place behind
your close up tube, make it a raster then
 Use your plugin penta Color dot on it with settings below.

 

 

 

Now on your Tube close up use Xero -Porcelain plugin with settings
below.

 

 

 

Now add your name and Copywrite and your done.

FTU Easter Fun

 

Supplies

 

Tube used Alex Prihodko from PFD HERE

Templet my Magik #0036 HERE

Scrapkit named Sweet as honey HERE

 

Scrap it studio Mask16 HERE

 

Font Transistor 2.15 HERE

 

 

Ok Lets start
Open Mask and Tube Minimize

Open Templet and duplicate close original

Close off credit, Word Art, And Word art BG, Ltop Star,

R bottom star,
Circle Ring, Circle ring outline. and half circle

Resize Templet to 77%

Click Image then do Canvas size 600x600

 

Open Splatter1 Resize 45% paste to tag

 

Open Frame2 Resize 50%  paste to tag

 

Open Eggs and Tulips1 Resize 50%  paste to tag

 

Open  Easter Sign Resize 80%  paste to tag

 

Open Bow 4 Resize 40%  paste to tag

 

Open swirls1 Resize 77%  paste to tag

 

Open psper 6 Resize 55%  paste to tag

Click on Smaller Center Circle then on your materials
flood fill with this color #c9fcc7

 

Click on center strip flood fill with this color #4df7fd

 

Click on center rectangle flood fill with this color #ff80bd

 

Click on lg Center Circle then go to Material then on forground
and choose Pattern for paper 6 and flood fill with it.

Do the same for bottom R Square, top L square, Top R Rec,
and Bottom L Rec.

 

Click top circle and Bottom Circle flood will with #f5fead color. Go to Effects, Texture Effects, Weave with

settings below.

 

Open easter egg 1 Resize both 30%  paste to tag

Open easter egg 2 Resize 35%  paste to tag

 

Open Sparkles3 paste to tag

 

Open Flower Chain2 Resize 66%  paste to tag then place on easter sign and
use your erraser tool to make it look like its hanging there.

Add a gradient glow of below to Top and Bottom circle.
Add same gradient glow to center stripe

 

 

 

 

Add a gradient glow by changing end color to pink
to below to large center circle outline.
Add same gradient glow to center Rectangle
Add same gradient glow to bottom R Square,and top L Square,
Top R Rec, and bottom L rec.

 

 

Open tube and I used her full size image C-P on top of small center
circle, then Click on smaller center circle select all, float,
defloat then on invert then choose your tube layer and hit delete.
Then select none.

Then I resize my tube to fit my tag place her and add my copywrite
and then my name.
 I used paper 6 for my name and font Transistor 2.15

C-P paper 6 and move to bottom layer then choose layers then on new mask layer
then from image then box will pop up choose the SIS mask

And your done