FTU Cupid Love

Scrap kit by Niqui at Creative Misfits HERE

Templet by Biene #3 at Creative Misfits HERE

Tube by Trinta at PFD HERE

Mask Weescotslass WSL-Mask220  HERE

Plug in Eye Candy 4000 -Gradient Glow

Ok lets start...........

Open Tube, Mask and minimize

Open templet duplicate it close original then
Resize 92%

Open Element 9 Resize 49% copy and paste to templet

Open Element 33 Resize 36% copy and paste to templet
Duplicate and then mirror

Open Element 10 Resize 36% copy and paste to templet

Open Element 12 Resize 71% copy and paste to templet

Open Element 11 Resize 52% copy and paste to templet

Open Element 18 Resize 52% copy and paste to templet

Open Element 32 copy and paste to templet and move it
behind rounded Rectangle

Open Element 31 Resize 52% copy and paste to templet

On Left and Right Circle go to effects, Texture effects
Weave See box below for settings.

Ok now click on the rounded Rectangle layer to select it
then Selections select all, Float, Defloat, then modify
by 2 then go to your layers and make a new layer below
the rectangle layer and flood fill it with white to make
a boarder.. then select none.

Ok open paper 10 and resize 82% copy and paste to tag with
it still selected click on layers, new Mask layer,
 From Image then in the pull down area look for WSL_Mask220

Then on ok then on merge group.

Ok now click on the Small red circle right layer to select it
then Selections select all, Float, Defloat, then modify
by 2 then go to your layers and make a new layer below
the circle layer and flood fill it with white to make
a boarder.. then select none, then go to Adjust and
add noise 100% do the same for Small red Circle Left.

Ok now add your tube and move her under all your elements,
and the tube thats below them erase.

Then select your close up tube and copy and paste it
above your red circle right then duplicate it and
then mirror it. Then click on the red circle layer
then selections, select all, Float, defloat, then
click Invert then delete on your key board.

Add a drop shadow for all elements.

Ok on both the Right and left Circles add a

gradient glow to both with the settings below

Ok now add your name and copywrite and your done!!

FTU-Mystic Wild

Loris FTU Kit Mystic Wild HERE

Very Many Tube HERE

Mask Weescotslass WSL-363 HERE

Font I used was Dr Sugiyama

HERE

Ok lets start............

Open your tube, the mask and minimize till we use it.

Open Element 25 go to image canvas size 647X635 on
width and height.

Open Element 1,2,3 Resize 79% copy and paste to tag
Free rotate 2 of them 20% one left and one right.

Open Element 26 copy and paste to tag

Open Element 11 Resize 79% copy and paste to tag
free rotate 20 left

Open Element 24 copy and paste to tag

Open Element 13 Resize 69% copy and paste to tag

Open Element 12 Resize 69% copy and paste to tag

Open Element 16 copy and paste to tag

Open Element 10 copy and paste to tag

Open Element 23 copy and paste to tag
Free rotate 35 then duplicate and mirror
 

Open Element 9 copy and paste to tag

Open Element 6 and paste to tag

Open Element 17 Resize 69% copy and paste to tag
then free rotate left 35 duplicate and mirror then
resize 79% on the copy.

Open Element 22 Resize 62% copy and paste to tag
I duplicated it 2 times.

Open Element 21 copy and paste to tag

Ok now I added my tube and moved her behind all the
elements and erased the tube that stuck out
the bottom.

Then I added the Close up tube to the frames by
copy and pasting the tube below each frame, then
using my magic wand tool and selecting the middle
of frame, then on Selections modify expand by 4
then I hit invert then delete on my computer key
board I did this for all 3 frames, the middle one
I mirrored tube. Then I selected again each frame
and then added a new layer and flood filled
selection with this color #b66433 and moved
each one under my close up tubes then on the
tube layer I turned the opacity to Overlay on
the top and bottom one and on middle one
to screen.

OK now lets add some drop shadow to your elements and
tubes.

Ok now copy and paste paper 2 then use mask WSL-363
by going to layers, new mask layer from image then in
pulldown area choose MSL-Mask363 then on ok. Then merge
those layers.

Now add your name and Copywrite and your Done :)

Mystic Amber -FTU

Tube is an Excusive tube Garvey that you can only

earn it HERE at Graphic Groupies

Loris FTU Kit Mystic Amber HERE

Templet By Millie HERE

Mask by Vix Bigmask 01 HERE 

Duplicate templet close original 

open tube and mask and minimize both

close off layers 3,10 and the makers 

info. 

Copy and paste paper P1 on top of layer 5

then click on that layer on the templet 

and select all, float, defloat, then invert

then click on the paper and hit delete on your

keyboard then select none.

Copy and paste paper P3 on top of layer 4

then click on that layer on the templet 

and select all, float, defloat, then invert

then click on the paper and hit delete on your

keyboard then select none.

Copy and paste paper P4 on top of layer 1

then click on that layer on the templet 

and select all, float, defloat, then invert

then click on the paper and hit delete on your

keyboard then select none.

Copy and paste paper P3 on top of layer 9 and 7

then click on that layer on the templet 

and select all, float, defloat, then invert

then click on the paper and hit delete on your

keyboard then select none.

Open Element MA-4 Resize 96% Mirror it and then

Copy and paste to templet 

Open Element MA-23 Copy and paste to templet 

Open Element MA-14 Copy and paste to templet 

Open Element MA-17 Copy and paste to templet 

Open Element MA-12 Resize 90% Copy and paste to templet 

Open Element MA-13 Resize 64% Copy and paste to templet 

Open Element MA-24 Copy and paste to templet 

Open Element MA-9 Resize 94% Copy and paste to templet

Open Element MA-11 Copy and paste to templet move to bottom

Open Element MA-18 Copy and paste to templet 

Copy and paste paper1 and move it to the bottom 

layer then choose layers, new mask layer then

in drop down menu cloose the VIX mask 1 and then

on ok. 

Now add your tube to the frames Layer 5 and copy of layer

5  then add your full size tube. 

Now time to add your name and your copywrite

and were done :)

FTU Love love love

Scrapkit by Golddust HERE

Templet 145 love is by Dee HERE

Alex Prihodko Tube from Picture for Designs site HERE

Open Tube, Mask and minimize.

Open Templet duplicate and close original.

Open paper 3 copy and paste to templet
3 times place each one on top of each of Center,Last and
first Brown Strip layers and on each one do this Click
on the brown strip layer select all, float, defloat,
Invert then click on the paper 10 and then hit delete
on your keyboard, then select none,  do this for
all 3 of the brown strip layers listed above.

Open paper 8 copy and paste to templet
2 times place each one on top of the layer- 4th Brown Strip and
2nd brown strip and then each one do this Click
on the brown strip layer select all, float, defloat,
Invert then click on the paper  and then hit delete
on your keyboard, then select none. 

Open Paper 10 and resize 83% copy and paste it above
layer yellow oval click on the oval layer select all,
float, defloat,Invert then click on the paper 
and then hit delete on your keyboard, then select none.

open Paper 4 and copy and paste it above
layer gold Circle click on the Circle layer select all,
float, defloat,Invert then click on the paper 
and then hit delete on your keyboard, then select none.

Select layer light pink heart, and dark pink heart and
flood fill with this color- #fba1ac

Open Element bow5 Resize 85% C-P to Templet

Open Element Envelope4 Resize 50% C-P to Templet

Open Element Gift1 Resize 50% C-P to Templet

Open Element Heartstring2 Resize 70% C-P to Templet

Open Element Rose1 Resize 70% C-P to Templet

Open Element Pillow Resize 45% C-P to Templet

Open Element Sparkle1 Resize 73% C-P to Templet

Open Element Color Splash1 Resize 73% C-P to Templet

Open your tube and use close up in both of the hearts
by placing your tube then using your magic wand to select
the layer then hit invert then hit delete on your keyboard.
I turned the opacity to 51% and changed it to Hard light on
both of the close ups.

I made a gradient to match my tube and flood filled a new layer
and moved it to the bottom layer and used mask WSL-mask84.

Then I resized my tube and added it to the tag now
add your copywrite and your name

Then I added a drop shadow to each layer and

then we are finished!!

FTU- Beauty of Love

Templet by Millie #793 HERE 

Kit by Peace 

Beauty in love HERE

Mask of your choice
I used WSLMask99 

Ok lets start 

Open Templet Duplicate it and close original

Open Tube minimize

Open mask minimize 

Open paper #3 copy and paste it above layer 5 then 

click on layer 5 and select it then select all, float,

defloat, invert,then click on your paper then hit

delete on your computer keyboard. Then Select none. 

Choose a color that will go with your tube and flood fill layer

3 I used a black and Red gradient. 

Open paper #8 resize to 73% then copy and paste it above layer 

1 then select the layer 1 then select all, float,defloat

then invert then click on your paper 8 and hit delete on the

keyboard then select none. 

open paper #1 resize it 62% c-p it above layer 4, 

then select the layer 4 then select all, float,defloat

then invert then click on your paper #1 and hit delete on the

keyboard then select none. 

on layer 11, and 10 frames I flood filled  with my red and black gradient 

0n layer 9, 8 frames I flood filled with black 

on layer 6 and 7 I used the magic wand and selected the white outside 

edge and flood filled with Red then on select none. I also flood filled 

the bg of the frame after I selected none. 

Open Element Bil104 Resize 58% copy and paste to templet 

Open Element Bil114 Resize 75% copy and paste to templet 

Open Element Bil108 Resize 53% copy and paste to templet 

Open Element Bil37 Resize 29% copy and paste to templet 

Open Element Bil35 Resize 64% copy and paste to templet 

Open Element Bil43 Resize 64% copy and paste to templet 

Open Element Bil71 Resize 64% copy and then colorize it 

By going to Adjust, Hue and Saturation, colorize use 

settings below then c-p to tag.

Ok now I went back to the layers 1,3,4 and 5 and selected

all and float, defloat, and then modify by 3 and then 

added a new layer moved it below each layer and flood

filled it with either White, red or Black then select

none,  then on that new layer I added Glitter 100%. 

Ok now I made a new layer and flood filled it with a

red and Black Gradient and moved it to the bottom layer

then I clicked on Layers new Mask layer and select your  

mask in the pull down area and then ok. 

Now lets add your tube I used a Barbara Jensen tube

and added the tube also to the small frames by placeing 

them and then selecting with a magic wand and then invert

then hitting delete on your keyboard I also turned the opacity

Blend mode-to LuminenceL on each one. 

I now added a drop shadow to every layer and then

added a Copywrite and my name we are now done :)