Monday, February 29, 2016

FTU- Shades of Shamrock






Kit by Tashas Playground HERE

Templet by Magik 0039 HERE

Mask by Vix HERE






Ok lets Start

Open Templet, Mask, and your tube
minimize tube and Mask
Duplicate Templet close original resize 77%
then Canvas size 648X648


Close off Credit layer and Center Rec. 

Open paper 4 and resize 75% copy and paste above
layer center Circle 1 then click on this layer
select all, float, defloat, invert then click
on the paper layer then hit delete on your
keyboard, then select none.

Open paper 1 and resize 75% copy and paste above
layer center Rec 2 then click on this layer
select all, float, defloat, invert then click
on the paper layer then hit delete on your
keyboard, then select none.

OK now I made a gradient with these 2 colors
#204a0a, #87be59 see settings below

Then I flood filled Center Rec 1, with the gradient.


Then I flood filled R Circle and L Circle with this color
#87be59

Then I flood filled Center Circle Back with this color
#56e010

Then I flood filled bottom R Circle, and top L Circle with this
color #56e010

Ok now on the L Circle and R Circle on one at a time I selected all float, defloat, modify by 3 then clicked to make a new layer, and flood filled it with green and then selected none and on each green layer I added 100 %  noise.

Ok now on the center Circle 1  I selected all float, defloat, modify by 3 then clicked to make a new layer, flood filled it with white and then selected none.

Ok now on the center Center Circle 2  I selected all float, defloat, modify by 3 then clicked to make a new layer, flood filled it with #ffce47 and then selected none.

Now on the center Bottom L Circle, and bottom R Circle
I selected all float, defloat, modify by 3 then clicked
to make a new layer, flood filled it with #ffce47 and
then selected none.

Now on the Center Rec 2 I selected all, float, defloat,
modify by 3 then clicked to make a new layer,
flood filled it with white and then selected none.

Ok on the dotted circle go to adjust, then Brightness/contrast with
the settings below.

this will make it white if you need to have it dark
then on the settings move the slidders the other direction. I did the same
settings making them white for top L dotted rec, bottom R dotted square, and L dotted Circle, and R dotted Circle.

Then Center Circle 2 I flood filled it with #2b830f

Open Element flower1 copy and paste to tag.

Open Element bow 1 Resize 65% copy and paste to tag.

Open Element charm copy and paste to tag.

Open Element deco1 copy and paste to tag duplicate
then mirror.

Open Element grass copy and paste to tag.

Open Element shamrock2 copy and paste to tag.

Open Element flower3  copy and paste to tag.

Open Element scatter copy and paste to tag then
change its color by clicking Adjust, Hue and Saturation
then color then use settings below

Then duplicate
place one on bottom and one on top. 



Open Element rings copy and paste to tag move it below
your scatter.

Open Element rainbow  copy and paste to tag duplicate
then move it below the other.

Now I made a gradient with #204a0a, #87be59
See the settings above for the Gradient.
Then I made a new layer and filled with this gradient
and moved it to the bottom layer.....
Then Click on Layers New Mask Layer, From Image,
Then in pull down area choose Vix-STpats2013 then
on ok then on layers pallet merge group.

Now add your tube on the outside ones I
turned opacity to Screen, and then close up
in the middle I turned it to 65%
and then add your full size tube
then copywrite and your name and your done!! 



Wednesday, February 17, 2016

FTU Lucky Lady


FTU kit by Vaybs -Lady luck HERE

Pinuptoons March Tube at CDO HERE

Simple Expressions 7 Templet
HERE

Weescotslass Mask WSL_Mask99  HERE

Eye Candy Gradient Glow

Lets Start

Open tube and Mask minimize

Open paper 4 Resize 90% copy and paste to tag move
it above shape 2, then click this layer and then
select all, float, defloat, then invert then go to layer
Paper 4 then hit delete on your computer key board, then
select none.

Open paper 11 Resize 90% copy and paste to tag move
it above shape 3, then click this layer and then
select all, float, defloat, then invert then go to layer
Paper 11 then hit delete on your computer key board, then
select none.

Open paper 2 Resize 90% copy and paste to tag move
it above shape 3, then click this layer and then
select all, float, defloat, then invert then go to layer
Paper 2 then hit delete on your computer key board, then
select none.

Ok now I made a gradient with these 2 colors
#529d0e and #e6dd90 and settings are below for
this then I flood filled layer shape 1, then
I went back to gradient and changed the repeats
to 12 and flood  filled med Frame, Small frame
and large frame with gradient.



Then I changed the gradient to the solid color
#f7ba44 and flood filled Large Frame Trim, Small
frame trim, and medium frame trim, and image then I added
noise to each one of 43%
Now I changed the color to #67a620 and flood filled all
of the Frame Fill layers.

Open Element 55 Resize 59% copy and paste to tag.

Open Element 8 Resize 59% copy and paste to tag.

Open Element 32 Resize 59% copy and paste to tag.

Open Element 48 Resize 59% copy and paste to tag.

Open Element 41 Resize 59% copy and paste to tag.

Open Element 54 Resize 47% copy and paste to tag.

Open Element 39 Resize 59% copy and paste to tag.

Open Element 45 Resize 59% copy and paste to tag.

Open Element 42 Resize 59% copy and paste to tag
duplicate 2 times and then flip these and mirror one.

I then went and added a gradient glow to all the frames
with Eye Candy below is settings then I moved the Frame
all the frame trim above on the layers.
Details are below for settings.


While I was on each of the frame trim I selected all
float, defloat, then modify by 2, then made a new layer
and moved it under frame trim and flood filled layer with
white then selected none. I did this on all 3 trims.

Then I went to shape 4 and selected all, Float, Defloat
modify by 3, then made a new layer moved it below the
shape 4 layer and flood filled it with this color #5ba116

Then I went to shape 3 and selected all, Float, Defloat
modify by 4, then made a new layer moved it below the
layer shape 3 and flood filled it with this color
#f7a410 I then added noise 43%

Then I went to shape 1 and selected all, Float, Defloat
modify by 4, then made a new layer moved it below the
layer shape 1 and flood filled it with this color
#f7a410 I then added noise 43%

Ok now go to Image Canvas size 625X625.

I now made a gradient the same as above and flood filled
the white bg then I used WSL-mask99
by new mask, from image, then in pull down area choose
WSL_mask99 then on ok.

ok now add your tube and your name and Copywrite and your done!

Tuesday, February 16, 2016

FTU Shamrock Dreams 3 Piece set








Sassy Dee dees Colab Shamrock Dreams HERE

Templet Set by Sly HERE

Weescotslass WSL_Mask218  HERE

LETS start..............
Open Templets and on the main tag templet duplicate, and close
original then resize 80% then canvas size 649X649


Duplicate Avi and the other set templet and close original.


Then minimize other 2 templets.

Close off all text and info.

Open your mask and Tube and minimize.

Open paper 5 Resize 78% copy and paste to tag move it
above blue rectangle then click on layer blue rectangle
then select all, float, defloat then in invert then
click on your blue rec. layer then hit Delete on your
key board then select none. 

Open paper 7 Resize 78% copy and paste to tag move it
above blue square then click on layer blue square
then select all, float, defloat then in invert then
click on your blue rec. layer then hit Delete on your
key board then select none. 

Open paper 3 Resize 68% copy and paste to tag move it
above small green square left and again on top of small green
 square right, then click on the left one
then select all, float, defloat then in invert then
click on your blue rec. layer then hit Delete on your
key board then select none now do the same  with the Right
side.

Open paper 19 Resize 78% copy and paste to tag move it
above large red square then click on layer blue square
then select all, float, defloat then in invert then
click on your blue rec. layer then hit Delete on your
key board then select none.

Open paper 5 Resize 78% copy and paste to tag move it
above large red square then click on layer blue square
then select all, float, defloat then in invert then
click on your blue rec. layer then hit Delete on your
key board then select none then I turned the opacity down
to 51% so you have 2 papers on this layer.

Flood Fill red Square with this color #5ea422

Open Element 47 Resize 56% copy and paste to tag.

Open Element 55 Resize 45% copy and paste to tag.

Open Element 51 Resize 45% copy and paste to tag
duplicate then mirror.

Open Element 49 copy and paste to tag then free rotate
left.

Open Element 123 copy and paste to tag.

Open Element 86  Resize 70% copy and paste to tag.

Open Element 25 Resize 70% copy and paste to tag.

Open Element 83 Resize 29% copy and paste to tag.

Open Element 23 Resize 27% copy and paste to tag.

Open Element 17 Resize 27% copy and paste to tag.
Make a new layer, and then make a gradient with
these 2 colors #5ea422 and #fad042

and then move layer to bottom of tag then flood
fill with layer with the gradient you made. Below
is the settings I used.







I then went to Layers
and choose New Mask Layer, From image then in
pull down area choose WSL_Mask218 and then on ok then
I merged group.

Then I went back to layers Small Green Square Right and
left, and Large Red Square and on each one at a time
 selected all, float, defloat, then modify by 2 then flood
fill with one of the accent colors of white, green, or the
yellow on each one I added 100% noise to them.

I added a drop shadow to elements and then
added my tube and close up then added my
name and copywrite and license and were done with tag.


Now on to the forum set templet

Open paper 5 resize 81% copy and paste to tag then
click on layer blue Rectangle select all float,
defloat then invert then click delete on your
key board and then select none.

Open paper 3 resize 81% copy and paste to tag then
duplicate move each one on top of green rectangle top,
green rectangle bottom then on each one select all, float,
defloat then invert then click delete on your
key board and then select none.

Ok now click on the red rectangle layer and flood fill it with
the gradient we used for the mask we used on the main tag.
Open Element 51 Resize 35% copy and paste to tag.

Open Element 49 copy and paste to tag then free rotate
left 90degrees.

Open Element 47 Resize 40% copy and paste to tag.

Then I went back to layers Green rectangle top and Bottom and
and on each one at a time selected all, float, defloat,
then modify by 3 then flood fill with one of the
accent colors of white, green, or the yellow on each one
I added 100% noise to them.

Then I added the tube to the red Square with this color
#4a9507 and then copied and pasted the tube and then
selected all, float defloat then invert then hit delete
on the keyboard.

I then added copywrite and name.

on the AVI I flood filled it with this color #4a9507
then added the tube and copywrite and my initial and
we are now done.

Monday, February 1, 2016

FTU Romantic Garv



 

FTU Mini Kit Mystic Romance By Lori HERE
Keith Garvey Tube HERE
Mask Weescotslass WSL-mask220 HERE
Word art made by me and Diamond supplies are at the bottom in
png format right click and save as.
 
Ok lets start
 
Open tube and mask minimize
 
Open new image 636 X 636
 
Open Element 12 Resize by 120% Copy paste to tag
Open Element 7  Copy paste to tag then free
rotate left 25%
 
Open Element 10  Copy paste to tag free
rotate left 50%
 
Open Element 11, mirror then free rotate
25% Copy paste to tag move below the frame
errase the element that sticks out below the
bottom of the frame.
 
Open Element 8 Copy paste to tag
 
Open Element 1 Copy paste to tag
 
Open Element 5 Resize by 150% Copy paste to tag
then resize it again to 175% and copy and paste
behind smaller heart.
 
Open Element 3 Copy paste to tag
Open Element 9 Resize by 120% Copy paste to tag
Open your tube and then copy and paste it behind
the heart frame then click on magic Wand tool
and select the middle of the heart frame and then
go to selections and modify by 5 and then hit
invert then hit delete on your keyboard then
go back to selections and hit invert again then
make a new layer and flood fill it with black.
I then turned the tube layer opacity to
luminance legacy.
 
Now copy and paste your tube under all elements
and then erase it sticking out the bottom.
 
Open Element diamond I have supplied
and copy it to the tag then duplicate it 5 times and
post them around the frame.
 
I then made a gradient of Red and Black and flood
filled tag background, then click Layers
new Mask Layer then from Image and in pull down
area select WSL_Mask220  and then on ok then merge group.
 
Then I copied and placed the wordart to tag.
 
I now added drop shadow to the elements.
 
Now add your name and copywrite and your done :)